Monday, September 26, 2016

Far too long

The drawback of being mildly active in Instagram is that I feel like I posted something when in fact the only thing I'm doing is to take pictures. The whole meat of thinking, critical philosophy and bacon are missing from there.

So I will try to take this again as the favored means of expression for all things wood.

So, first things first, my new handles:


I'm getting more and more friend of french polish. Very thin shellac, a rag and patience is all you need. And sand a bit if you want at the end. Micromesh is your friend if you want mirror finish.

(That's how far 10usd will take you in files in a Chilean flea market. Old Nicholson, Erizo and a Swedish one. )

The handles... I've spent quite a long time thinking about them. Or rather thinking on them, as Roubo would say. The sharpness of the lines doesn't come that easy. You need to gouge carefully and make scrapers that fit nicely on the curves. The one on the right is my favourite atm.

On the japanese department I rehandled a chisel and re-ura it on the grinder.




Making the ura was simpler than what I thought on the electric grinder but not as reliable as to do it with all my chisels. I'm thinking of a jig to help with this. I like skinny uras. Ideally though on should have different grinding wheels for different chisels. My wheel is 8" and anything larger than 15mm is not possible to make in one pass.

So, why did I end up handling my chisels? I was making a new blade for my small brass lie nielsen plane with A2 steel. What a piece of crap is the steel. It's like eating european meat when you have lived all your life in chile. A hard rubber without taste, it takes ages to sharpen and scratches super easy.

What else? Got kidney stones. First time in July for my birthday and then last week again. Not fun. That got me into bed for longer I'd like and implied that I had to spend more time working in front of the computer to catch up after that. But now summer is around the corner and we need to prepare for the summer school 2017, where we will finish the roof of the Kincho in puerto varas.




6 comments:

  1. I just replaced the A2 blade from my LN #4 Bronze with a O1 from Hock tools and I do enjoy it much more.

    ReplyDelete
    Replies
    1. you should try japanese irons ;) I like them much more than my hock blade, which is 10 times better than the A2.

      Delete
  2. You have carved these handles?
    Yes, I can see instantcoffeegram is having a bad influence on you (us).

    Greetings,

    Don

    ReplyDelete
    Replies
    1. turned them, yes. Got myself a new late that you can see in instacofee. The secret for sharp curves is to finish them with scrapers and then just sand 200 onwards as to not change the form, only smooth the grain.

      You need some? I can send you a few.

      Delete
  3. I thought it was carving and not turning. How do I come to your instant-free-photo-download-upload image hosting server where you are putting up all these pictures?

    Don

    ReplyDelete
    Replies
    1. you can check it here:

      https://www.instagram.com/tsuresuregusa/

      Delete